The Arizer Go SRT suits vapers who care about pure flavor and want a vape that fits in a pocket. Earlier Arizer portables had glass tubes sticking out the top; the Go SRT keeps the mouthpiece recessed and sealed with a magnetic cap.

The Go Shell capsule system makes the vape practical for people who like to prepare sessions ahead of time. You can pre-load several glass capsules at home and swap them in seconds for a clean session every time.

An included water pipe adapter makes the Go SRT ready for water pipe use as well. The replaceable battery and strong warranty coverage also suit vapers who keep their vaporizer for years.

The Go SRT measures 11 × 6 × 3 cm and weighs about 240 g with the mouthpiece and cap in place. It fits in a jacket or jeans.

The key design change is the concealed mouthpiece with a magnetic cap. The glass mouthpiece sits recessed inside the body, and a silicone cap seals the opening with magnets when not in use. During sessions, the cap attaches magnetically to the bottom of the vape.

The body is aluminium with a matte finish and feels solid in the hand. The magnetic lid lifts off for access to the chamber.

The entire vapor path is borosilicate glass from chamber to lips, with no plastic touching the vapor at any point. Every Arizer portable uses this all-glass design, and Go SRT continues the tradition.

Borosilicate glass is heat-resistant and flavor-neutral, so it lets the natural taste of your herbs come through clearly.

The Go Shell is Arizer’s first dosing capsule. Each shell is a small glass capsule with a screen that holds up to 0.3 g, though about 0.2 g works best for airflow.

You load a shell by dipping and rotating it in a container of ground herbs, or by filling it by hand. Press lightly with the silicone cap’s built-in indentation to tamp. Both ends seal with silicone caps for odour-free storage.

The shells let you pre-load multiple sessions at home and swap them in seconds. You don’t need to carry loose herbs or load on the spot.

You can expand your Go Shell setup with accessories sold separately: a carry case with ten shells, a loading case with a tray that fills up to six shells at once, and an Arizer grinder that grinds directly into the loading case tray for a seamless grinder-to-shell workflow.

The Go SRT supports four glass configurations:

1. Go Shell + mouthpiece – the most compact setup with the widest airflow. Best for quick sessions away from home.
2. glass aroma tube – the classic Arizer method. Herbs load directly into the tube’s cup end, no shell needed.
3. Go Shell + water pipe adapter – connects to any 14 mm water pipe or bubbler. The adapter is included in the box.
4. Frosted glass aroma tube – a single glass piece with a frosted 14 mm end that fits directly into any water pipe. Sold separately.

The Go SRT is also compatible with all existing ArGo glass accessories, including aroma tubes and bubbler mouthpieces. Solo 3 glass aroma tubes are not compatible.

The Go SRT uses a hybrid system: 75% convection and 25% conduction. Hot air flows through your herbs for the main extraction, while the heated oven walls add heat through direct contact. This combination helps extract herbs evenly throughout the chamber.

The ceramic heating element is ready in 5 to 15 seconds from a cold start, and the vape vibrates when the target temperature is reached.

The full temperature range runs from 50°C to 220°C, adjustable in 1° steps.

The SRT interface provides three presets you can fully edit. Each preset stores its own temperature and session time, so you can set up different profiles for different herbs or preferences.

Session times range from 20 seconds to 5 minutes. A 20-second setting works for quick, on-demand draws, while 5 minutes suits a longer, relaxed pace. You switch presets with the UP and DOWN buttons during standby.

The display tracks your session progress from heat-up through to cool-down. When you flip the vape for water pipe use, the screen and controls invert automatically.

At lower temperatures (around 175°C), the Go SRT tends to produce light vapor with well-preserved terpene flavor that lasts through most of a session. Higher temperatures (around 200°C) bring a fuller character with more pronounced effects.

At the maximum 220°C, extraction is strong but the flavor loses its freshness after a few draws. Water filtration helps at higher temperatures.

The Go SRT runs on a 21700 lithium-ion battery that provides roughly 10 sessions or about 50 to 60 minutes of use per charge. USB-C charging takes about two hours for a full charge, and a 15-minute top-up adds roughly 20%.

Pass-through charging lets you use the vape while plugged in, so a low battery doesn’t mean waiting for a session. Eco charging mode is active by default and limits the charge to 80% to preserve long-term battery health. You can override this for a full charge by holding UP while connected.

The battery is user-replaceable with basic tools, so the vaporizer’s useful life extends well beyond the battery’s natural cycle count.

The Go SRT operates with just three buttons: ACTION, UP, and DOWN. Here is how a session works with the Go Shell method:

1. Place a screen in the large opening of a Go Shell, then fill with ground herbs (about 0.2 g).
2. Tamp lightly with the silicone cap’s indentation, leaving a small gap at the top for airflow.
3. Drop the shell into the chamber using the silicone grip, narrow tip facing up.
4. Remove the magnetic cap and insert the glass mouthpiece from the top.
5. Hold ACTION for three seconds to power on, select your preset, and press ACTION to heat.
6. Draw once all the bars on the display turn yellow.
7. After your session, lift the oven lid and use the grip to remove the hot shell.

The glass aroma tube offers a simpler alternative. Fill the tube’s cup end with ground herbs and insert it upside down so herbs don’t fall onto the heating element.

Arizer portables are known for easy maintenance, and the Go SRT keeps that up. Hold the vape upside down and wipe the chamber with a cotton swab dipped in isopropyl alcohol. Glass parts and screens soak clean in isopropyl alcohol; rinse with hot water and let everything dry fully before your next session.

You can rotate multiple Go Shells between sessions to keep each one cleaner for longer. A medium grind with a light pack also helps screens stay clean. If the draw starts to feel tight, the screen is usually the first thing to check.

The Arizer Solo 3 is Arizer’s most powerful portable and a strong choice for home use. It offers up to three hours of battery life, an XL glass aroma tube that holds 0.5 g, and slightly stronger extraction at higher temperatures.

The Solo 3’s exposed glass tube makes it less practical to carry around. The Go SRT tucks its mouthpiece inside the body and seals it with a magnetic cap, so it travels like a solid metal device rather than a fragile glass one.

The Go Shell system gives the Go SRT dosing capsule convenience that the Solo 3 lacks entirely. Heat-up speed is comparable between the two. For vapers who want Arizer’s glass-pure flavour in a form that fits in a pocket, the Go SRT is the better choice.

The Storz & Bickel Venty is a flagship portable at a higher price point. It features adjustable airflow up to 20 litres per minute, a built-in flowmeter that adapts heater output to your draw speed, and a well-established dosing capsule ecosystem. The adjustable airflow makes it one of the easiest-drawing portables available, and it has longer battery life.

The Venty uses PEEK plastic in its vapour path. The Go SRT wins on flavour purity with an all-glass path from chamber to lips, where no plastic ever touches the vapour.

The Go SRT is also more compact, includes a 14 mm water pipe adapter in the box, supports pass-through charging, and has a user-replaceable battery. For vapers who prioritise clean flavor and a smaller form factor over maximum airflow, the Arizer Go SRT is the better fit.

MagicVaporizers offers a 25% discount on all accessories when purchased with any vaporizer. Based on customer feedback, these accessories help you get more from your Arizer Go SRT:

Shell carry case with 10 Go Shells: The complete all-day kit with screens, aroma tube caps, grips, and a stirring tool. Pre-load at home and swap shells throughout the day.

Shell loading case with 6 Go Shells: Magnetic case with a loading tray for filling six shells at once. Pairs with the Arizer grinder below for the fastest prep workflow.

Arizer grinder: 3-piece aluminium grinder optimised for the medium grind that works best with Go Shells. Grind directly into the loading case tray. Grinders are 35% off when purchased with a vaporizer.

Extra Go Shells (6-pack): Six additional shells for more pre-loaded sessions and less time cleaning between them.

Extra Go Shell grips (6-pack): Keep one fitted to each loaded shell so every swap is quick and comfortable.

Go screens (6-pack): Fresh replacement screens that restore airflow and flavour when the originals build up residue.

Extra glass aroma tubes: Spare tubes for the classic Arizer loading method. Glass is fragile, so worth keeping on hand.

Arizer soft-shell case: Padded case with three compartments for the Go SRT, glass parts, and a charging cable.

The Arizer Go SRT comes with a lifetime warranty on the heating element, a 2-year limited warranty covering defects in materials and workmanship, and a 1-year warranty on the battery; glass accessories are not covered.

All Arizer Go SRT vaporizers sold by MagicVaporizers44australia  are authentic Arizer products.